APC Smart-UPS RT 10kVA 230V – SRTG10KXLI

This APC Smart-UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. This 10kVA online rack/tower UPS provides pure sine wave power and extended runtime to support critical electronics during power disruptions.

It comes with hard wire 3-wire (1P+N+E) input, 2x IEC 320 C13, 1x IEC 320 C19, and Hardwire 3-wire (H+N+E) outlets. The UPS has an embedded Network Management Card for UPS network-based monitoring and management.

The UPS comes with a PowerChute Network Shutdown that provides a graceful shutdown of physical servers, virtual machines, and HCI clusters. The UPS can connect to EcoStruxure IT or third-party centralized management platforms. The UPS is compatible with SRTGRK1 rail kit sold separately.

Product Specifications

Overview

Lead time	Usually in Stock

Main

Run time for load W information_stroke Min-max: 1000-10000 W	3min 32s
Max. Capacity Used information_stroke	100 %
Main Input Voltage	230 V
Other Input Voltage	220 V 240 V
Main Output Voltage	230 V
Other Output Voltage	220 V 240 V
Rated power in W	10000 W
Rated power in VA	10000 VA
output connection type	2 IEC 60320 C13 1 IEC 60320 C19
Output connector type	Hardwire 3-wire (H N + E) 1
Number of rack unit	5U
Provided equipment	1 x USB cable 1 x rack mounting brackets 1 x stabilization/wall mounting feet 1 x installation manual 1 x C13-C14 power cord

Batteries & Runtime

Run Time	View Runtime Graph action_new_window
Efficiency	View Efficiency Graph action_new_window
Battery type	Lead-acid battery
Number of battery-filled slots	0
Number of battery-free slots	0
Battery recharge time	4 h
Number of battery replacement quantity	2
Battery voltage	+/- 96 V
Battery charger power	431 W rated
Battery life	3…5 year(s)
Replacement battery	APCRBC174 action_new_window
Extended runtime	1

General

UPS type	Double conversion online
Number of power module free slots	0
Number of power module-filled slots	0
Redundant	No

Physical

Color	Black (RAL 9005)
height	21.7 cm
Width	44 cm
Depth	68 cm
Net weight	101.5 kg
Mounting preference	No preference
Mounting mode	Rack-mounted with kit
Two post mountable	0
USB compatible	Yes
Mounting position	Horizontal

Input

Network frequency	40…70 Hz auto-sensing
Number of input connectors	1 hard wire 3-wire (1P + N + E)
Input voltage limits	160…285 V full load
Maximum input current	30 A
Max short-time withstand current	40 kA

Output

Maximum configurable power in VA	10000 VA
Maximum configurable power in W	10000 W
Output frequency	50/60 Hz +/- 4 Hz sync to mains
Wave type	Sine wave
Efficiency	93.5 %
Harmonic distortion	Less than 2 %
Crest factor	3: 1
Bypass type	Internal bypass (automatic and manual)
Additional information	Configurable for 220: 230 or 240 nominal output voltage

Conformance

product certifications	CE UKCA TISI
Standards	EN/IEC 62040-1:2019/A11:2021 EN/IEC 62040-2:2006/AC:2006 EN/IEC 62040-2:2018

Environmental

Ambient air temperature for operation	0…40 °C
Relative humidity	0…95 % non-condensing
Operating altitude	0…3000 m
Ambient air temperature for storage	-15…45 °C
Storage Relative Humidity	0…95 % non-condensing
Storage altitude	0…15000 m
Acoustic level	55 dBA
heat dissipation	2217.98 Btu/h
IP degree of protection	IP20

Communications & Management

Preinstalled device	Network management card 3 with environmental monitoring
Alarm	Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm
Emergency power off	Yes

Surge Protection and Filtering

Surge energy rate	600 J

Packing Units

Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	68.5 cm
Package 1 Width	59.4 cm
Package 1 Length	79.4 cm
Package 1 Weight	124.5 kg

Contractual warranty

Warranty	3 years for repair or replacement (excluding battery) and 2 years for battery